dmesg - Testing my AMC C-60 CPU
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-35-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #55-Ubuntu SMP Wed Dec 5 17:42:16 UTC 2012 (Ubuntu 3.2.0-35.55-generic 3.2.34)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000de63c000 (usable)
BIOS-e820: 00000000de63c000 - 00000000de83c000 (ACPI NVS)
BIOS-e820: 00000000de83c000 - 00000000dfd3f000 (usable)
BIOS-e820: 00000000dfd3f000 - 00000000dfdbf000 (reserved)
BIOS-e820: 00000000dfdbf000 - 00000000dfebf000 (ACPI NVS)
BIOS-e820: 00000000dfebf000 - 00000000dfef6000 (ACPI data)
BIOS-e820: 00000000dfef6000 - 00000000dff00000 (usable)
BIOS-e820: 00000000dff00000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000010f000000 (usable)
BIOS-e820: 000000010f000000 - 000000011f000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Acer AO722/JE10-BZ, BIOS V1.06 09/19/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x10f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 0DFEBD000 mask FFFFFF000 uncachable
4 base 0FFE00000 mask FFFE00000 write-protect
5 disabled
6 disabled
7 disabled
TOM2: 000000011f000000 aka 4592M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdff00 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fe1b0] fe1b0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000dff00000
0000000000 - 00c0000000 page 1G
00c0000000 - 00dfe00000 page 2M
00dfe00000 - 00dff00000 page 4k
kernel direct mapping tables up to dff00000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-000000010f000000
0100000000 - 010f000000 page 2M
kernel direct mapping tables up to 10f000000 @ dfefe000-dff00000
RAMDISK: 364d4000 - 37262000
ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 00000000dfef5120 00064 (v01 ACRSYS ACRPRDCT 00000003 01000013)
ACPI: FACP 00000000dfef4000 000F4 (v04 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: DSDT 00000000dfee8000 089F9 (v01 ACRSYS ACRPRDCT F0000000 1025 00040000)
ACPI: FACS 00000000dfe97000 00040
ACPI: HPET 00000000dfef3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 00000000dfef2000 00084 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 00000000dfef1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BOOT 00000000dfee7000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SLIC 00000000dfee6000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000dfee5000 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 00000000dfee3000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000010f000000
Initmem setup node 0 0000000000000000-000000010f000000
NODE_DATA [000000010effb000 - 000000010effffff]
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff88010aa00000-ffff88010e5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0010f000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000de63c
0: 0x000de83c -> 0x000dfd3f
0: 0x000dfef6 -> 0x000dff00
0: 0x00100000 -> 0x0010f000
On node 0 totalpages: 977624
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 895881 pages, LIFO batch:31
Normal zone: 960 pages used for memmap
Normal zone: 60480 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000de63c000 - 00000000de83c000
PM: Registered nosave memory: 00000000dfd3f000 - 00000000dfdbf000
PM: Registered nosave memory: 00000000dfdbf000 - 00000000dfebf000
PM: Registered nosave memory: 00000000dfebf000 - 00000000dfef6000
PM: Registered nosave memory: 00000000dff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88010ec00000 s83136 r8192 d23360 u524288
pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 960275
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3752844k/4440064k available (6569k kernel code, 529568k absent, 157652k reserved, 6634k data, 924k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 31457280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 997.448 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.89 BogoMIPS (lpj=3989792)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00dff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 27030 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD C-60 APU with Radeon(tm) HD Graphics stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (3989.90 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at de63c000 (2097152 bytes)
PM: Registering ACPI NVS region at dfdbf000 (1048576 bytes)
print_constraints: dummy:
RTC time: 14:25:21, date: 01/11/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
Extended Config Space enabled on 0 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xffffffff]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
pci 0000:00:01.0: [1002:9807] type 0 class 0x000300
pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
pci 0000:00:01.0: reg 18: [mem 0xf0400000-0xf043ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
pci 0000:00:01.1: reg 10: [mem 0xf0444000-0xf0447fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
pci 0000:00:11.0: reg 24: [mem 0xf044c000-0xf044c3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xf044b000-0xf044bfff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xf044a000-0xf044a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xf0449000-0xf0449fff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xf0448000-0xf04480ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
pci 0000:00:15.3: supports D1 D2
pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfc000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 02-05]
pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:06:00.0: [1969:2062] type 0 class 0x000200
pci 0000:06:00.0: reg 10: [mem 0xf0200000-0xf023ffff 64bit]
pci 0000:06:00.0: reg 18: [io 0x2000-0x207f]
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:15.2: PCI bridge to [bus 06-06]
pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:07:00.0: [14e4:4727] type 0 class 0x000280
pci 0000:07:00.0: reg 10: [mem 0xf0100000-0xf0103fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:15.3: PCI bridge to [bus 07-07]
pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000de63c000 - 00000000dfffffff
reserve RAM buffer: 00000000dfd3f000 - 00000000dfffffff
reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
reserve RAM buffer: 000000010f000000 - 000000010fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
pnp 00:00: [mem 0xfc000000-0xffffffff window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfec00000-0xfec00fff]
pnp 00:01: [mem 0xfee00000-0xfee00fff]
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [irq 0 disabled]
pnp 00:02: [irq 8]
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0081-0x008f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x00f0-0x00fe]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs ETD0500 ETD0001 PNP0f13 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x002e-0x002f]
pnp 00:09: [io 0x0072-0x0073]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x00b0-0x00b1]
pnp 00:09: [io 0x0092]
pnp 00:09: [io 0x0400-0x04cf]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x04d6]
pnp 00:09: [io 0x0680-0x06ff]
pnp 00:09: [io 0x077a]
pnp 00:09: [io 0x0c00-0x0c01]
pnp 00:09: [io 0x0c14]
pnp 00:09: [io 0x0c50-0x0c52]
pnp 00:09: [io 0x0c6c]
pnp 00:09: [io 0x0c6f]
pnp 00:09: [io 0x0cd0-0x0cdb]
system 00:09: [io 0x0400-0x04cf] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0680-0x06ff] has been reserved
system 00:09: [io 0x077a] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cdb] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x000e0000-0x000fffff]
pnp 00:0a: [mem 0xffe00000-0xffffffff]
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:15.0: PCI bridge to [bus 02-05]
pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 06-06]
pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:15.3: PCI bridge to [bus 07-07]
pci 0000:00:15.3: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.0: setting latency timer to 64
pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.2: setting latency timer to 64
pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.3: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xffffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:01: resource 19 [mem 0xfc000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:07: resource 1 [mem 0xf0100000-0xf01fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.2: PCI INT B disabled
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800da63c000 - ffff8800de63c000
software IO TLB at phys 0xda63c000 - 0xde63c000
Simple Boot Flag at 0x44 set to 0x1
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1357914320.768:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 7329
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
ERST: Table is not found!
GHES: HEST is not enabled!
Freeing initrd memory: 13880k freed
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf044c000 port 0xf044c100 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: setting latency timer to 64
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf044a000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: setting latency timer to 64
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0448000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: setting latency timer to 64
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xf044b000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: setting latency timer to 64
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0449000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 13:652:434
rtc_cmos 00:05: setting system clock to 2013-01-11 14:25:22 UTC (1357914322)
powernow-k8: Found 1 AMD C-60 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (1000 MHz)
powernow-k8: 1 : pstate 1 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ACPI: Battery Slot [BAT1] (battery present)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000BPVT-22HXZT3, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-2: new high-speed USB device number 3 using ehci_hcd
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 924k freed
Write protecting the kernel read-only data: 12288k
Refined TSC clocksource calibration: 997.502 MHz.
Switching to clocksource tsc
Freeing unused kernel memory: 1604k freed
Freeing unused kernel memory: 1196k freed
udevd[87]: starting version 175
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
atl1c 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
atl1c 0000:06:00.0: setting latency timer to 64
usbcore: registered new interface driver uas
usb 2-2: USB disconnect, device number 3
atl1c 0000:06:00.0: version 1.0.1.0-NAPI
scsi1 : usb-storage 2-2:1.0
usbcore: registered new interface driver ums-realtek
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[319]: starting version 175
Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
lp: driver loaded but no devices found
acpi device:01: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
wmi: Mapper loaded
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x1
acer_wmi: Brightness must be controlled by generic video driver
input: Acer WMI hotkeys as /devices/virtual/input/input6
acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0
acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xb8fe00 already in use
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device 1.3M WebCam (0402:9665)
input: 1.3M WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:00:01.0: setting latency timer to 64
[drm] initializing kernel modesetting (PALM 0x1002:0x9807 0x1025:0x0598).
[drm] register mmio base: 0xF0400000
[drm] register mmio size: 262144
ATOM BIOS: Acer
radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1885224 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 40 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading PALM Microcode
brcmsmac 0000:07:00.0: bus 7 slot 0 func 0 irq 11
brcmsmac 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
brcmsmac 0000:07:00.0: setting latency timer to 64
type=1400 audit(1357914336.836:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=616 comm="apparmor_parser"
type=1400 audit(1357914336.840:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=616 comm="apparmor_parser"
type=1400 audit(1357914336.840:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=616 comm="apparmor_parser"
type=1400 audit(1357914336.852:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=658 comm="apparmor_parser"
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040213)
psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c.
psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
cfg80211: Calling CRDA for country: XV
psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:00:01.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA
[drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
init: failsafe main process (807) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1357914338.856:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=878 comm="apparmor_parser"
type=1400 audit(1357914338.860:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=878 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
[drm] fb mappable at 0xE0142000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0
snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
snd_hda_intel 0000:00:01.1: irq 41 for MSI/MSI-X
snd_hda_intel 0000:00:01.1: setting latency timer to 64
type=1400 audit(1357914339.092:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=918 comm="apparmor_parser"
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:00:14.2: setting latency timer to 64
type=1400 audit(1357914339.112:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=919 comm="apparmor_parser"
type=1400 audit(1357914339.112:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=919 comm="apparmor_parser"
type=1400 audit(1357914339.112:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=919 comm="apparmor_parser"
psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
atl1c 0000:06:00.0: irq 42 for MSI/MSI-X
hda_codec: CX20588: BIOS auto-probing.
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input12
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
cfg80211: Pending regulatory request, waiting for it to be processed...
postgres (1242): /proc/1242/oom_adj is deprecated, please use /proc/1242/oom_score_adj instead.
wlan0: authenticate with 00:21:27:d3:38:9a (try 1)
wlan0: authenticated
wlan0: associate with 00:21:27:d3:38:9a (try 1)
wlan0: RX AssocResp from 00:21:27:d3:38:9a (capab=0x431 status=0 aid=1)
wlan0: associated
ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
ieee80211 phy0: changing basic rates failed: -22
ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Pending regulatory request, waiting for it to be processed...
init: anacron main process (1019) killed by TERM signal
ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
init: plymouth-stop pre-start process (1729) terminated with status 1
wlan0: no IPv6 routers present
------------[ cut here ]------------
Hardware name: AO722
Modules linked in: joydev snd_hda_codec_conexant snd_hda_codec_hdmi rfcomm bnep bluetooth parport_pc ppdev binfmt_misc bcma arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer brcmsmac mac80211 psmouse snd_seq_device brcmutil radeon uvcvideo serio_raw videodev cfg80211 k10temp crc8 v4l2_compat_ioctl32 cordic ttm snd drm_kms_helper drm sp5100_tco i2c_piix4 soundcore i2c_algo_bit snd_page_alloc acer_wmi sparse_keymap mac_hid wmi video lp parport ums_realtek uas atl1c usb_storage
Pid: 2585, comm: kworker/u:0 Not tainted 3.2.0-35-generic #55-Ubuntu
Call Trace:
[] warn_slowpath_common+0x7f/0xc0
[] warn_slowpath_null+0x1a/0x20
[] brcms_c_wait_for_tx_completion+0x99/0xb0 [brcmsmac]
[] brcms_ops_flush+0x3b/0x60 [brcmsmac]
[] ieee80211_scan_work+0x12f/0x3e0 [mac80211]
[] ? finish_task_switch+0x4a/0xf0
[] ? ieee80211_scan_rx+0x190/0x190 [mac80211]
[] process_one_work+0x11a/0x480
[] worker_thread+0x164/0x370
[] ? manage_workers.isra.31+0x130/0x130
[] kthread+0x8c/0xa0
[] kernel_thread_helper+0x4/0x10
[] ? flush_kthread_worker+0xa0/0xa0
[] ? gs_change+0x13/0x13
---[ end trace cc5c3bc7d923d872 ]---
usb 1-1: new high-speed USB device number 2 using ehci_hcd
scsi2 : usb-storage 1-1:1.0
scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sdb: detected capacity change from 8004304896 to 0
usb 1-1: USB disconnect, device number 2